Latest Protocols Articles

Categories

Examples of Analog Signals in Control Systems

Examples of Analog Signals in Control Systems

Many articles address the wiring and implementation of analog control signals, but where are they used, and what might make them a better (or perhaps worse) decision than digital input/output devices?


Banner’s New Current Sensor Converter For Digital Current Signals

Banner’s New Current Sensor Converter For Digital Current Signals

The use of signal converters, like Banner Engineering’s new current sensors with Snap Signal, can help manufacturers further connect their factories and monitor current to prevent future breakdowns.


News Jul 20, 2023 by Damond Goodwin
Industrial Wireless Technology: Communication and Programming

Industrial Wireless Technology: Communication and Programming

Wireless technology is typically slower to adoption for industrial automation, but what wireless advancements are shaping the current and future landscape of the automated factory floor?


Virtual LAN for IT/OT Nodes in Industrial Control Systems

Virtual LAN for IT/OT Nodes in Industrial Control Systems

Virtual networks can connect or isolate various local control networks through configuration of a managed switch. Why would we use VLANs, and how can you segment a network switch to create a VLAN?


Ignition SCADA Software: What are Tags and How are They Used?

Ignition SCADA Software: What are Tags and How are They Used?

An introduction to the various tag types used within one of the leading supervisory control and data acquisition (SCADA) software powering IIoT, HMI, and I4.0 applications: Ignition by Inductive Automation.


Expanding I/O in the Field: Banner Engineering New Discrete Modbus Hub

Expanding I/O in the Field: Banner Engineering New Discrete Modbus Hub

Recently, Banner released a new lineup of eight-port discrete converters, allowing input of up to 16 different digital I/O devices and assigning them to pre-defined Modbus registers for ease of integration.


News Jun 13, 2023 by Shawn Dietrich
Methods and Algorithms in Error Checking for Serial Communications

Methods and Algorithms in Error Checking for Serial Communications

Errors in communications often manifest as a result of electrical noise interrupting the data during the transmission process, leading to various methods for determining whether received data has been damaged.


Siemens Releases a New Virtual PLC, the S7-1500V

Siemens Releases a New Virtual PLC, the S7-1500V

The SIMATIC S7-1500V is Siemens's newest PLC, but it looks completely different than any other PLC… Mainly because it doesn’t physically exist.


News Jun 08, 2023 by Shawn Dietrich
New Smart Firewall For Emerson’s Distributed Control Systems (DCS)

New Smart Firewall For Emerson’s Distributed Control Systems (DCS)

Emerson has enhanced its DeltaV Distributed Control System with the addition of their NextGen Smart Firewall for better network security as manufacturing and plant connectivity continue to grow.


News Jun 01, 2023 by Damond Goodwin
Engineering Editorial Perspective: 2023 Top Trends in Automation

Engineering Editorial Perspective: 2023 Top Trends in Automation

What are some of the most recent developments making waves in the world of robotics and automation? Learn about a few trends with some editorial thoughts about the future of the technology for end users.


News May 31, 2023 by David Peterson
Connectors Used in Industrial and Robotic Cable Termination

Connectors Used in Industrial and Robotic Cable Termination

Industrial and robotics cabling requires specialized termination strategies. This article introduces connectors involved in automation applications for cable-to-cable or cable-to-device termination.


New OnLogic Edge Server Promises to Convert Raw Data into Real Value

New OnLogic Edge Server Promises to Convert Raw Data into Real Value

OnLogic has recently released a new edge server built on Intel’s 13th-gen i-series processors, ready to harness the processing power of technology for increased power and efficiency on the shop floor.


News May 30, 2023 by Shawn Dietrich
Highlights and Photos from Automate 2023

Highlights and Photos from Automate 2023

Join Control Automation for a review of the show highlights and a special feature of some exciting booths visited on the last and final day of the Automate trade show. Excited for the next year of innovation!


News May 28, 2023 by David Peterson
Field Input and Output Blocks From Allen-Bradley

Field Input and Output Blocks From Allen-Bradley

Rockwell Automation has released an IO-Link master with configurable ports designed for harsh, on-machine environments with the ability to connect both discrete and IO-Link field devices.


News May 26, 2023 by Shawn Dietrich
Developing Standardized Practices for PLC Programming

Developing Standardized Practices for PLC Programming

Any kind of computer programming can be challenging to determine what aspects are truly unique versus what aspects should be standardized across projects and platforms to streamline future development.


Covering all the Latest Control Technology: Automate 2023

Covering all the Latest Control Technology: Automate 2023

The second day of Automate 2023 in Detroit was a huge success! The Control Automation engineering and sales team met with a number of companies to discuss and explore the exciting, innovative demonstrations.


News May 25, 2023 by David Peterson
Automate 2023: First Glimpse From the Show

Automate 2023: First Glimpse From the Show

It’s the first two days of Automate 2023, and the Control Automation team hit the streets to learn about the latest and greatest technology rocking the world of robotics and industrial automation!


News May 24, 2023 by David Peterson
Understanding Wire Color Codes for Industrial Electrical Applications

Understanding Wire Color Codes for Industrial Electrical Applications

Designing, installing, and maintaining control systems involves a lot of wires. Each wire has a purpose, often indicated by the color of the insulation. But what are the common colors, and what do they mean?


A Toolbox “Must-have”: Finding Network Faults With the CableMaster 210

A Toolbox “Must-have”: Finding Network Faults With the CableMaster 210

Softing has released a network cable tester with continuous testing, tone generation, and individual conductor testing, allowing users to troubleshoot for a faulty or incorrectly connected cable quickly.


News May 11, 2023 by Shawn Dietrich
HMS Networks Expands Anybus Offerings With New Business Line and Wireless Technology

HMS Networks Expands Anybus Offerings With New Business Line and Wireless Technology

HMS Networks has expanded its Anybus portfolio with products and services designed to help diagnose industrial network-related issues and provide seamless wireless connectivity.


News May 03, 2023 by Shawn Dietrich