Latest Pulp & Paper Articles

Categories

Managing Multi-user PLC Programming: Git Version Control

Managing Multi-user PLC Programming: Git Version Control

PLC and other automation project software can be easier and more efficient to update and maintain thanks to the introduction of Git control, already a staple for typical programming of large-scale projects.


Driving Motors Faster: Rockwell’s New PowerFlex 6000T VFD

Driving Motors Faster: Rockwell’s New PowerFlex 6000T VFD

Increasing motor speed is critical in many situations, but it also poses serious risks in both electrical and mechanical performance if not driven properly. Enter Rockwell Automation’s new PowerFlex 6000T.


News Oct 13, 2022 by David Peterson
ABB Ability Smart Sensor Now For Use With General Machinery

ABB Ability Smart Sensor Now For Use With General Machinery

ABB expanded its Ability Smart Sensor capabilities to allow customers to perform predictive and preventative maintenance for not only powertrain equipment, but now general machinery and industrial motors.


News Oct 10, 2022 by Gunner Scott
Info Byte: The Mystery of Ice Cube Relays–Coil Polarity

Info Byte: The Mystery of Ice Cube Relays–Coil Polarity

Relay and other coil devices pose a few confusing questions: How can the relay still work if you connect a DC supply in reverse? How can an alternating voltage attract and hold the load consistently?


Why is 4-20 mA Current Used for Industrial Analog Sensors?

Why is 4-20 mA Current Used for Industrial Analog Sensors?

Industrial analog sensor devices primarily use 0-10 volt or 4-20 milliamp. For those mA signals, learn the reasons for why the lower and upper limit standards were determined as 4 mA and 20 mA.


 PLC Program Commands: Arrays and Pointers

PLC Program Commands: Arrays and Pointers

The ability to utilize an array effectively is a fundamental skill in becoming a PLC programmer, but it can also be very complex and difficult to master. Let’s do a run-down of arrays and some of their complexities!


Schmalz’ Needle Gripper Technology for Porous Materials

Schmalz’ Needle Gripper Technology for Porous Materials

​​​​​​​Schmalz has released their new “needle gripper” used as an alternative to vacuum grippers in materials handling for natural and porous materials such as particle board. 


News Aug 30, 2022 by Seth Price
Challenges and Best Practices Implementing Industrial IoT Solutions

Challenges and Best Practices Implementing Industrial IoT Solutions

As the IIoT continues to grow in the industrial sector, businesses face a number of obstacles to integrating its solutions. Learn about these challenges as well as some potential solutions.


Festo Celebrates 50 Years Stateside with Planned Campus Expansion

Festo Celebrates 50 Years Stateside with Planned Campus Expansion

To mark their 50th anniversary, Festo plans to build their first North American Global Production Center on their 47-acre Mason campus to expand their customized solution capabilities.


News Aug 28, 2022 by Stephanie Leonida
3-phase Motor Types: Synchronous and Induction Motors

3-phase Motor Types: Synchronous and Induction Motors

In this article, we will take a look at the differences between synchronous and induction motors, as well as the two types of induction motors: squirrel cage and wound rotor.


Solving the Biggest Challenge of IoT Devices: Power

Solving the Biggest Challenge of IoT Devices: Power

Remote locations are notoriously difficult to supply power, yet they are the exact locations where many data points must be collected. How can IoT devices be designed to conserve power to last for months or even years?


Components of the Industrial Internet of Things

Components of the Industrial Internet of Things

Learn about the four IIoT architecture layers: perception, network, processing, and application, and how  these layers are necessary to implement IIoT in an industrial setting to benefit varying processes.


Bosch Rexroth’s ACTIVE Cockpit Upgrade for Friendlier Navigation

Bosch Rexroth’s ACTIVE Cockpit Upgrade for Friendlier Navigation

Bosch Rexroth’s user-feedback driven redesign of their ACTIVE Cockpit software increases productivity and reduces the time required for process optimization for friendlier use in manufacturing.


News Aug 22, 2022 by Seth Price
ABB to Purchase Siemens’ Low Voltage NEMA Motor Business

ABB to Purchase Siemens’ Low Voltage NEMA Motor Business

ABB looks to expand its lineup of motors with its acquisition of Siemens' Low Voltage NEMA Motor Business, a move that ABB hopes will benefit the two parties by bringing the Siemens' portfolio to its full potential.


News Aug 19, 2022 by Damond Goodwin
IoT Software Distribution Models: Cloud Based and On Premises

IoT Software Distribution Models: Cloud Based and On Premises

Software distribution models have historically been on premises, however, as industry has become more digital, cloud-based solutions have become increasingly popular, including SaaS and its variants, IaaS and PaaS.  


Preventing Failures in High-Temperature Manufacturing Processes

Preventing Failures in High-Temperature Manufacturing Processes

Any machine can become a source of elevated temperature, even under regular operation. We cannot assume that temperature problems occur only based on climate conditions, and mitigation steps must be employed.


Rockwell Automation Releases New Signaling Beacons For Plant Floor Improvement

Rockwell Automation Releases New Signaling Beacons For Plant Floor Improvement

With multiple lighting combinations available on the new 855R beacon system, several different signals can be produced to visually and audibly alert operators of machine conditions in a more accurate manner.


News Aug 11, 2022 by Damond Goodwin
I/O Module Debate: Transistor vs. Relay Output?

I/O Module Debate: Transistor vs. Relay Output?

When selecting the right module for the right load, be sure to understand how the load resistance will affect the voltage and current of the output module terminals.


The Annual EETech Engineering Survey of 2022

The Annual EETech Engineering Survey of 2022

The quality of content from our educational site comes from understanding our audience and your needs. Help give us the best snapshot of today’s control industry, along with a free chance to win one of several Amazon card prizes!


News Aug 09, 2022 by David Peterson
PATLITE Introduces NHV4 / NHV6 Network Signal Tower with Voice Annunciator

PATLITE Introduces NHV4 / NHV6 Network Signal Tower with Voice Annunciator

PATLITE's newest network signal tower speaks. With a text-to-speech function, machine operators and industrial workers are not only alerted of potential dangers via light and sound, but also now with voice.


News Aug 05, 2022 by Stephanie Leonida