Latest Rubber & Plastics Articles

The timer is a fundamental function of ladder logic programming. In this article, we discuss on- and off-delay as well as…

The timer is a fundamental function of ladder logic programming. In this article, we discuss on- and off-delay as well as retentive timers and define the inputs and outputs required to properly use them.

Scaling values has a wide range of applications and helps to match output values to their real-world applications. Most…

Scaling values has a wide range of applications and helps to match output values to their real-world applications. Most scaling is linear, but many of these real-world changes are not quite so simple.

HELUKABEL adds EKD Systems and Sangel Systemtechnik to its network to become a complete electrical connection system…

HELUKABEL adds EKD Systems and Sangel Systemtechnik to its network to become a complete electrical connection system solution provider.

Power supplies tend to get a reputation as one of the most important power considerations of a DC control circuit - but…

Power supplies tend to get a reputation as one of the most important power considerations of a DC control circuit - but we can’t ignore other key players: power filters, converters, and backup power modules.

SMC announces a new electric actuator series with high-rigidity guide rods, equipped with a battery-less encoder, driven…

SMC announces a new electric actuator series with high-rigidity guide rods, equipped with a battery-less encoder, driven by stepper motor and matching drive compatible with multiple networks.

Even with the most reliable networks, network outages are inevitable for a host of reasons, and managing these outages in…

Even with the most reliable networks, network outages are inevitable for a host of reasons, and managing these outages in VFD systems becomes critically important.

Control Automation Day 2022 will be on June 21st, focusing on PLC systems, packed with keynote addresses, educational…

Control Automation Day 2022 will be on June 21st, focusing on PLC systems, packed with keynote addresses, educational live sessions, and exciting giveaways from your favorite manufacturers!

Allen Bradley’s Data Highway Plus (DH+) networking ability is still found commonly in interfaces with legacy equipment.…

Allen Bradley’s Data Highway Plus (DH+) networking ability is still found commonly in interfaces with legacy equipment. Understanding this network structure can bridge the gap between old and new systems.

Although the are similarities in operating theory, relays and contactors are used in industrial circuits for different…

Although the are similarities in operating theory, relays and contactors are used in industrial circuits for different specific applications, and should not be used interchangeably.

What’s the difference between a Cat 6 and a Cat 6a cable, anyhow? Ethernet cables must meet certain performance…

What’s the difference between a Cat 6 and a Cat 6a cable, anyhow? Ethernet cables must meet certain performance standards, and these standards can be quite confusing at first glance.

Hysteresis is a term introduced in basic control system courses and listed on sensor datasheets, but the terms is not…

Hysteresis is a term introduced in basic control system courses and listed on sensor datasheets, but the terms is not often understood, with error deriving from both the system itself as well as the sensor.

Rockwell recently announced the newest addition to the PowerFlex family of VFD units - the Armor PowerFlex series,…

Rockwell recently announced the newest addition to the PowerFlex family of VFD units - the Armor PowerFlex series, designed for on-machine control with heightened IP ratings over previous models.

In this first of an upcoming series, we investigate Siemens as a major PLC manufacturer, learning about the hardware,…

In this first of an upcoming series, we investigate Siemens as a major PLC manufacturer, learning about the hardware, software, and key applications of each product lineup.

While UR enjoys a record first quarter in 2022, a joint project between UR and mobile robot manufacturer MiR looks to…

While UR enjoys a record first quarter in 2022, a joint project between UR and mobile robot manufacturer MiR looks to develop solutions for mobility to advance the future of cobot applications.

The Keyence Corporation recently announced the NQ series network communication module, with the ability to automatically…

The Keyence Corporation recently announced the NQ series network communication module, with the ability to automatically detect any Keyence branded IO-Link devices for rapid installation and monitoring.

‘Reduce-reuse-recycle’ is a common slogan for promoting reduction of waste associated with end use of materials. But…

‘Reduce-reuse-recycle’ is a common slogan for promoting reduction of waste associated with end use of materials. But a circular economy model includes manufacturing processes and raw materials as well.

Hydraulic component leader Parker Hannifin recently announced a new PAC motion controller and module series with…

Hydraulic component leader Parker Hannifin recently announced a new PAC motion controller and module series with web-based visualization for instant remote monitoring of up to 40 motion axes.

The United States Department of Commerce has appointed 27 new members to the National AI Advisory Committee (NAIAC).

The United States Department of Commerce has appointed 27 new members to the National AI Advisory Committee (NAIAC).

Two common methods exist for driving induction motors with VFDs - linear scalar control, which is often labeled as V/f,…

Two common methods exist for driving induction motors with VFDs - linear scalar control, which is often labeled as V/f, and vector, or field-oriented control, which can be a bit more complex to understand.